Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Size/Diameter | 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch |
Single Piece Length | 3 meter, 6 meter, 18 meter, 36 meter, >36 meter |
Application | Drinking Water, Utilities Water, Chemical Handling, Gas Handling, Food Products |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Certification | ISO |
Condition | New |
Aesteiron Steels LLP is one of the leading manufacturers, suppliers and exporters of Inconel B443 Sheets |
Grade:
ASTM B443
UNS N06625
WNR 2.4856
Availabilty in
Inconel 625 Round
Inconel 625 Bar
Inconel 625 Sheets
Inconel 625 Plates
Inconel 625 Flat
Inconel 625 Square Bar
Inconel 625 Hexagon
Inconel 625 Angle
Inconel 625 Tubes
Inconel 617 Pipes
Inconel 625 Forgings
Inconel 617 Fittings
N06625 Round
N06625 Bar
N06625 Square Bar
N06625 Hexagon
N06625 Angle
N06625 Tube
N06625 Pipe
N06625 Sheets
N06625 Plates
N06625 Forgings
2.4856 Round
2.4856 Bar
2.4856 Square Bar
2.4856 Hexagon
2.4856 Plate
2.4856 Sheets
2.4856 Pipes
2.4856 Tubes
2.4856 Angle
2.4856 Forgings
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Nb | Other |
0.1 | .50 max | .015 max | .015 max | .50 max | 20.0 -23.0 | 58.0 min | 8.0 - 10.0 | 1.0 max | 0.40 max | 0.40 max | 5.0 max | 3.15 - 4.15 |
Inconel B443
UNS |
Trademark |
W.Nr |
N06625 |
Inconel B443 |
2.4856 |
Please contact us for more details
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Grade | AMS 5542, UNS N07750, WNR 2.4669 |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Certification | ISO |
Condition | New |
Aesteiron Steels LLP, is one of the leading manufacturers, suppliers and exporters of AMS 5542 Sheets/ UNS N07750/ WNR 2.4669 |
Alloy |
% |
Ni |
Cr |
Fe |
Nb |
Co |
C |
Mn |
Si |
|
Cu |
Al |
Ti |
Inconel X-750 |
Min. |
|
14 |
5.0 |
0.7 |
|
|
|
|
|
|
0.4 |
2.25 |
Max. |
70 |
17 |
9.0 |
1.2 |
1.00 |
0.08 |
1.00 |
0.5 |
0.01 |
0.5 |
1.0 |
2.75 |
Density |
8.28 g/cm3 |
Melting range |
1393-1427°C |
UNS |
Trademark |
W.Nr |
N07750 |
Inconel X750 |
2.4669 |
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Type | Sheet, Plate |
Surface | Galvanised |
Grade | Inconel B409 |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Condition | New |
C | MN | P | S | Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Al + Ti | Grain |
.10 max | 19.0 - 23.0 | 30.0-35.0 | 0.15 - 0.60 | 0.15 -0.60 | 39.5 min | 3.15 4.15 |
UNS |
Trademark |
W.Nr |
UNS N08800 |
Inconel 800 |
1.4876 |
Please contact us for more details.
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Grade | Inconel A480 |
Certification | ISO |
Condition | New |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Chemical Composition ofASTM A480 Sheets/ UNS S35045
Alloy | Ni | Cr | Fe | C≤ | Al | Ti | Mn | Cu | Si |
Incoloy 803 | 32.0 - 37.0 | 25.0 -29.0 | Bal | 0.1 | 0.15 -0.6 | 0.15 - 0.6 | 1.5 max | 0.75 max | 1.0 max |
Properties of ASTM A480 Sheets/ UNS S35045
Alloy | Density (g/cm3) | Melting Range (°C) | Specific heat(J/kg.K) |
Incoloy 803 | 7.86 | 1365-1400 | 479 |
Applications of ASTM A480 Sheets/ UNS S35045
Ethylene furnace quench boilers
Hydrocarbon cracking
Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
Industrial furnaces
Heat-treating equipment
Chemical and petrochemical processing
Super-heater and re-heaters in power plants
Pressure vessels
Heat exchangers
Inconel 803
UNS | Trademark |
UNS S35045 | Inconel 803 |
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Grade | Inconel 825, UNS N08825, WNR 2.4858 |
Density | 8.14 g/cm3 |
Surface | Galvanised |
Condition | New |
Certification | ISO |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Availability in
Inconel 825 Round
Inconel 825 Bar
Inconel 825 Sheet
Inconel 825 Plates
Inconel 825 Flat
Inconel 825 Square Bar
Inconel 825 Hexagon
Inconel 825 Angle
Inconel 825 Tubes
Inconel 825 Pipes
Inconel 825 Forgings
N08825 Round
N08825 Bar
N08825 Square Bar
N08825 Hexagon
N08825 Angle
N08825 Tube
N08825 Pipe
N08825 Sheets
N08825 Plates
N08825 Forgings
2.4858 Round
2.4858 Bar
2.4858 Square Bar
2.4858 Hexagon
2.4858 Angle
2.4858 Tube
2.4858 Pipe
2.4858 Sheets
2.4858 Plates
2.4858 Forgings
Inconel B424 Characteristics
Inconel B424 Chemical Composition
Ni | Fe | Cr | Mb | Cu | Ti | C | Mn | S | Si | Al |
38.0-46.0 | 22.0 min | 19.5-23.5 | 2.5-3.5 | 1.5-3.0 | .6-1.2 | 0.05 max | 1.0 max | 0.03 max | 0.5 max | 0.2 max |
Density of Inconel B424 Sheets & Plates
Inconel B424 Applications
Inconel B424 Corrosion Resistance
Incoloy 825 has a high level of corrosion resistance. It resists general corrosion, pitting, crevice corrosion, intergranular corrosion, and stress-corrosion cracking in both reducing and oxidizing environments.
Product Forms of Inconel B424 Sheets & Plates
Inconel 825
UNS |
Trademark |
W.Nr |
N08825 |
Inconnel 825 |
2.4858 |
Please contact us for more details.
Product Details:
Size | 2000 x 1000, 2500 x 1250 and 3000 x 1500 or as per requirement |
Country of Origin | Made in India |
Grade | Inconel B906 |
Certification | ISO |
Condition | New |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Aesteiron Steels LLP, is one of the leading manufacturers, suppliers and exporters of Inconel B906 Sheets
Availability in
Inconel 890 Round
Inconel 890 Bar
Inconel 890 Sheets/ Plates
Inconel 890 Coil
Inconel 890 Flat
Inconel 890 Square Bar
Inconel 890 Hexagon
Inconel 890 Angle
Inconel 890 Tubes/ Pipes
Inconel 890 Forgings
N08890 Round
N08890 Bar
N08890 Square Bar
N08890 Hexagon
N08890 Angle
N08890 Tube/ Plates
N08890 Sheets/ Plates
N08890 Forgings
Chemical Composition, % of Inconel B906 Sheets
Nickel..................42.5
Chromium ................25
Iron ....................Bal.
Aluminum.................0.1
Niobium ...................0.4
Titanium ................1 max.
Carbon.....................0.1
Manganese ...............1 max.
Silicon ................1.8
Phosphorus .................0.03 max.
Sulfur .....................0.015 max.
Copper...................0.75 max.
Molybdenum........................1.5
Tantalum ........................0.2
Physical Constants of Inconel B906 Sheets
Density,
lb/in3- 0.287
g/cm3- 7.94
Melting Range,
°C 1309- 1383
°F 2388- 2522
Inconel 890
UNS | Trademark |
UNS N08890 | Inconel 890 |
Please contact us for more details
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Grade | Inconel 907, UNS N19907 |
Type | Sheets |
Thickness | 0.5-2.5mm |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Condition | New |
Certification | ISO |
Inconel 907
UNS | Trademark |
UNS N19907 | Inconel 907 |
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Grade | Inconel 909, UNS N19909 |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Certification | ISO |
Condition | New |
Aesteiron Steels LLP, is one of the leading manufacturers, suppliers and exporters of Inconel 909 Sheets/ UNS N19909
Availability in
Inconel 909 Round
Inconel 909 Bar
Inconel 909 Sheets
Inconel 909 Plates
Inconel 909 Flat
Inconel 909 Square Bar
Inconel 909 Hexagon
Inconel 909 Angle
Inconel 909 Tube
Inconel 909 Pipe
Inconel 909 Forgings
N19909 Round
N19909 Bar
N19909 Square Bar
N19909 Hexagon
N19909 Angle
N19909 Tube
N19909 Pipe
N19909 Sheets
N19909 Plates
N19909 Forgings
Inconel 909 Chemical Composition
Nickel ..........35.0-40.0
Cobalt.......12.0-16.0
Niobium.......4.3-5.2
Titanium..........1.3-1.8
Iron ..........Balance*
Silicon........0.25-0.50
Aluminum.......0.15 max.
Carbon........0.06 max.
Inconel 909 Physical Properties
Density,
lb/in3................0.296
g/cm3...........8.19
Melting Range,
°F ..........2540-2610
°C .............1395-1430
Curie Temperature,
°F ..............750-850
°C ............400-455
Young’s Modulus,
103 ksi ...........23.0
GPa............159
Shear Modulus,
103 ksi .........8.6
GPa...........59
Inconel 909
UNS | Trademark |
UNS N19909 | Inconel 909 |
Please contact us for more detail
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Certification | ISO |
Condition | New |
Grades | Inconel 25-6MO, UNS N08926, WNR 1.452 |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Inconel 25-6MO
UNS |
Trademark |
W.Nr |
N08926 |
Inconnel 25-6MO |
1.4529 |
Product Details:
Size | 3m, 6m, 12m or as per requirement |
Country of Origin | Made in India |
Grade | Inconel 27-7MO, UNS S31277 |
Surface | Galvanised |
Type | Sheet |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Certification | ISO |
Condition | New |
Aesteiron Steels LLP, is one of the leading manufacturers, suppliers and exporters of Inconel 27-7MO Sheets & Plates/ UNS S31277 Availabilty in Inconel 27-7MO Round Inconel 27-7MO Bar Inconel 27-7MO Sheets/ Plates Inconel 27-7MO Flat Inconel 27-7MO Square Bar Inconel 27-7MO Hexagon Inconel 27-7MO Angle Inconel 27-7MO Tubes/ Pipes Inconel 27-7MO Forgings S31277 Round S31277 Bar S31277 Square Bar S31277 Hexagon S31277 Angle S31277 Tube/ Plates S31277 Sheets/ Plates S31277 Forgings Inconel 27-7MO Chemical Composition Nickel ..............................26.0-28.0 Chromium........................20.5-23.0 Molybdenum .....................6.5-8.0 Copper ............................0.5-1.5 Nitrogen............................0.3-0.4 Iron .................................Balance* Manganese .......................3.00 max. Phosphorus .........................03 max. Sulfur ................................0.01 max. Silicon ...............................0.5 max. Carbon................................0.020 max. Inconel 27-7MO Physical Properties Density at room temperature, mill annealed conditon g/cm³.................8.02 lb/in³...............0.289 Permeability at 200 oersted (15.9 kA/m) at room temperature Annealed.....................1.004 Permeability at 200 oersted (15.9 kA/m) at -22°F (<-30°C) Annealed..................<1.0150% cold worked............<1.01 Specific Heat J/kg°C.....................454 Btu/lb °F..............0.109 Electrical Resistivity at room temp., mill annealed condition ohm•circmil/ft............604 µohm•cm................100 Inconel 27-7MO
Please contact us for more details |
Product Details:
Length | As Per Requirement |
Size | As Per Requirement |
Diameter | As Per Requirement |
Condition | New |
Packing Details | Shrink Wrapping, Jute Wrapping, Wooden Boxes etc |
Product Details:
Grade | ASTM B168, UNS N06601, WNR 2.4851 |
Type | Sheet |
Surface | Galvanised |
Density | 1.2g/cm3 |
Aesteiron Steels Pvt Ltd is one of the leading manufacturers, suppliers and exporters of Inconel B168 Sheet & Plate |
Inconel B168 Chemaical composition:
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
601 | Min. | 58 | 21 | 1.0 | |||||||
Max. | 63 | 25 | balance | 0.1 | 1.5 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
Inconel B168
UNS | Trademark | W.Nr |
N06601 | Inconnel B168 | 2.4851 |
Please contact us for more details.
Product Details:
Country of Origin | Made in India |
Grade | Inconel B409/ UNS N08811/ WNR 1.4959 |
Type | Nickel Plate |
Density | 8.4g/cm3 |
Elongation | 30 % |
Packing Details | Shrink Wrapping, Jute Wrapping, Bubble Wrapping, Wooden Boxes, Carton, etc. |
Product Details:
Size | As Per Requirement |
I Deal In | New Only |
Country of Origin | Made in India |
Grade | ASTM B168, UNS N06600, WNR 2.4816 |
Diameter | 5-200mm |
Surface | Galvanised |
Certification | ISO |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | P | S |
600 | Min. | 72 | 14 | 6 | ||||||
Max. | 17 | 10 | 0.15 | 1 | 0.5 | 0.5 | 0.015 | 0.015 |
Inconel B168 Characteristic
1.Good corrosion resistance property for the reduction, oxidation, Nitric and other media.
2.Good stress corrosion cracking resistance property in both room temperature and high temperature.
3.Good corrosion resistance of the dry chlorine and chlorine hydride.
4.Good mechanical property when below zero, room temperature and high temperature.
5.Good anti-creep rupture strength, with the recommendation of 700°C or above working environment.
Inconel B168
UNS |
Trademark |
W.Nr |
N06600 |
Inconel B168 |
2.4816 |
Please contact us for more details.
Product Details:
Size | 2000 x 1000, 2500 x 1250 and 3000 x 1500 or as per requirement |
I Deal In | New Only |
Country of Origin | Made in India |
Grade | AMS 5598, UNS N07750, WNR 2.4669 |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Condition | New |
Certification | ISO |
Alloy |
% |
Ni |
Cr |
Fe |
Nb |
Co |
C |
Mn |
Si |
|
Cu |
Al |
Ti |
Inconel X-750 |
Min. |
14 |
5.0 |
0.7 |
0.4 |
2.25 |
|||||||
Max. |
70 |
17 |
9.0 |
1.2 |
1.00 |
0.08 |
1.00 |
0.5 |
0.01 |
0.5 |
1.0 |
2.75 |
Corrosion resistance of AMS 5598 / UNS N07750/ WNR 2.4669
Inconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media.
UNS |
Trademark |
W.Nr |
N07750 |
Inconel X750 |
2.4669 |
Product Details:
Size | As Per Requirement |
I Deal In | New Only |
Country of Origin | Made in India |
Inconel | A240 |
Certification | ISO |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Aesteiron Steels LLP is one of the leading manufacturers, suppliers and exporters of Inconel A240 Plates.
Nickel ...............................................32.0-37.0 Chromium..........................................25.0-29.0 Iron ...................................................Balance* Carbon .............................................0.06-0.10 Aluminum ........................................0.15-0.60 Titanium...........................................0.15-0.60 Copper..............................................0.75 max. Sulfur ..............................................0.015 max. Manganese .....................................1.5 max. Silicon .............................................1.0 max. Density g/cm3...................................................7.86
ksi ............................28.3 GPa.................................195
ksi................................10.7 GPa...................................73.8
°C .....................................................1365-1400
J/kg•°C............................................479
|
Product Details:
Size | As Per Requirement |
I Deal In | New Only |
Country of Origin | Made in India |
Grade | Inconel 864, UNS S35135 |
Density | 0.290 lb/in3 |
Melting Range | 1353-1393 degree celsius |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Aesteiron Steels LLP is one of the leading manufacturers, suppliers and exporters of Inconel 864 Plates & Sheets/ UNS S35135 Availabilty in Inconel 864 Round Inconel 864 Bar Inconel 864 Sheets/ Plates Inconel 864 Flat Inconel 864 Square Bar Inconel 864 Hexagon Inconel 864 Angle Inconel 864 Tubes/ Pipes Inconel 864 Forgings S35135 Round S35135 Bar S35135 Square Bar S35135 Hexagon S35135 Angle S35135 Tube/ Plates S35135 Sheets/ Plates S35135 Forgings Inconel 864 Chemical Composition Ni 30 - 38 C 0.08 max. Cr 20 - 25 Mn 1.0 max. Mo 4.0 - 4.8 S 0.015 max. Si 0.6 - 1.0 Fe Balance Ti 0.4 - 1.0 Inconel 864 Physical Properties Density, lb/in3...................................................................0.290 g/cm3....................................................................8.02 Melting Range, °F....................................................2467-2539 °C ...................................................1353-1393 Electrical Resistivity at 70°F (21°C) ohm•circ mil/ft..................................628 μΩ•m ...............................................1.04 Permeability at 200 oersted (15.9 kA/m) .........................1.004 Inconel 864
Please contact us for more details |
Product Details:
Size | 2000 x 1000 , 2500 x 1250 and 3000 x 1500 or as per requirement |
I Deal In | New Only |
Country of Origin | Made in India |
Grade | Inconel B409 |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Condition | New |
Inconel 890
UNS | Trademark |
UNS N08890 | Inconel 890 |
Product Details:
Grades | UNS N19903, Inconel 903 |
Type | Plate |
Surface | Galvanised |
Thickness | 0.5-2.5mm |
Aesteiron Steels Pvt Ltd is one of the leading manufacturers, suppliers and exporters of Inconel 903 Sheets & Plates |
Availability in
Inconel 903 Round
Inconel 903 Bar
Inconel 903 Sheets/ Plates
Inconel 903 Flat
Inconel 903 Square Bar
Inconel 903 Hexagon
Inconel 903 Angle
Inconel 903 Tubes/ Pipes
Inconel 903 Forgings
N19903 Round
N19903 Bar
N19903 Square Bar
N19903 Hexagon
N19903 Angle
N19903 Tube/ Plates
N19903 Sheets/ Plates
N19903 Forgings
Inconel 903 Chemical Composition
Nickel ..........36.0-40.0
Cobalt........13.0-17.0
Aluminum ...........0.30-1.15
Titanium........1.00-1.85
Niobium...........2.40-3.50
Iron .............Balance*
Inconel 903 Physical Constants
Density,
lb/in3.....................0.298
g/cm3.....................8.25
Curie Temperature
°F....................780-880
°C ..................416-471
Melting Range
°F..................2405-2539
°C ................1318-1393
Inconel 903
UNS | Trademark |
UNS N19903 | Inconel 903 |
Please contact us for more details
Product Details:
Single Piece Length | 3 meter, 6 meter, 18 meter, 36 meter, >36 meter |
Application | Drinking Water, Utilities Water, Chemical Handling, Gas Handling, Food Products |
Is It ISO Certified | ISO Certified |
Size/Diameter | 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch |
Country of Origin | Made in India |
Packing Details | Shrink wrapping, jute wrapping, bubble wrapping & wooden boxes or as per requirement |
Condition | New |
Aesteiron Steels LLP is one of the leading manufacturers, suppliers and exporters of Inconel B167 Seamless Pipe
UNS N06601 / W.Nr. 2.4851
ASTM, ASME, DIN, ISO
OD: 10 - 325mm
WT: 1.0 - 30mm
Length: up to 12m
C | Mn | S | Si | Ni |
Cu |
Fe | Cr |
Al |
0 .10 max | 1.0 max | 0.015 max | 0.50 max | 58 - 63 |
1.0 max |
Rest | 21 - 25 |
0.0 - 1.7 |
Inconel B167
UNS |
Trademark |
W.Nr |
N06601 |
Inconnel B167 |
2.4851 |